1 VEHICLE BROUGHT TO WORKSHOP
2 INSPECT BATTERY VOLTAGE
Standard voltage: 11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
3 BASIC INSPECTION
Result
4 CHECK FOR DTC
HINT:
Result
5 DIAGNOSTIC TROUBLE CODE CHART
Find the output code on the diagnostic trouble code chart
6 PROBLEM SYMPTOMS TABLE
Refer to the problem symptoms table
Result
7 OVERALL ANALYSIS AND TROUBLESHOOTING
8 ADJUST, REPAIR OR REPLACE
9 CONFIRMATION TEST
END
Pressure Control Solenoid "B" Electrical (Shift
Solenoid Valve SL2)
DESCRIPTION
Shifting from 1st to 5th is performed in combination with "ON" and "OFF"
operation of the shift solenoid
valves SL1, SL2, SL3, S4 and SR which are controlled by the ECM. If an open or
short circuit occurs in
either of the shift solenoid valves, the ECM cont ...
Disposal
HINT:
Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.
When scrapping a vehicle equipped with the SRS or
disposing of the curtain shield airbag assembly, be sure to
deploy the airbag first in accordance with the proce ...
Removal
1. REMOVE FRONT DOOR OPENING TRIM
WEATHERSTRIP LH
2. REMOVE FRONT DOOR OPENING TRIM
WEATHERSTRIP RH
3. REMOVE FRONT PILLAR GARNISH LH
4. REMOVE FRONT PILLAR GARNISH RH
5. REMOVE VISOR ASSEMBLY LH
6. REMOVE VISOR ASSEMBLY RH
7. REMOVE ASSIST GRIP SUB-ASSEMBLY (2)
8. REMOVE VISOR HOLDER (1)
...