Toyota Sienna Service Manual: How to proceed with troubleshooting
HINT: Troubleshoot in accordance with the procedures on the following pages.
1 VEHICLE BROUGHT TO WORKSHOP
2 CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK
3 PROBLEM SYMPTOMS TABLE
- When problem is not listed on problem symptoms table, proceed to A.
- When problem is listed on problem symptoms table, proceed to B.
4 PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM
- Data list / Active test.
- Circuit inspection
5 ADJUST, REPAIR OR REPLACE
6 RESET POWER WINDOW REGULATOR MOTOR
- If the AUTO switch (driver side switch) light of the power window master switch is blinking after the repair, reset the power window motor
END
Power window control system (w/ Jam Protection
Function)
PARTS LOCATION
...
Operation check
1. CHECK WINDOW LOCK SWITCH
Check that the passenger side power window and
slide door power window operation is disabled when
the window lock switch of the power window master
swit ...
Other materials:
Inspection
1. INSPECT HEATED OXYGEN SENSOR (for Bank 1
Sensor 2)
(a) Measure the resistance of the sensor.
Standard resistance
If the resistance is not as specified, replace the
sensor.
2. INSPECT HEATED OXYGEN SENSOR (for Bank 2
Sensor 2)
(a) Measure the resistance of the sensor.
Standard r ...
Short to GND in Rear Curtain Shield Squib LH
Circuit
DTC B1637/85 Short to GND in Rear Curtain Shield Squib LH
Circuit
DESCRIPTION
The rear curtain shield squib LH circuit consists of the center airbag sensor
assembly and the curtain
shield airbag assembly LH.
The circuit instructs the SRS to deploy when deployment conditions are met.
DTC ...
System description
1. DESCRIPTION OF OCCUPANT CLASSIFICATION SYSTEM
GENERAL DESCRIPTION.
In the occupant classification system, the
occupant classification ECU calculates the
weight of the occupant based on a signal from
the occupant classification sensors. This system
recognizes the occu ...
