Toyota Sienna Service Manual: How to proceed with troubleshooting

Check and replace ecu

NOTICE: • The connector should not be disconnected from the ECU. Perform the inspection from the backside of the connector on the wire harness side. • When no measuring condition is s ...

Operation flow

HINT: Perform troubleshooting in accordance with the procedures below. The following is an outline of basic troubleshooting procedures. Confirm the troubleshooting procedures for the circuit you a ...

Other materials:

Air Mix Damper Control Servo Motor Circuit (Passenger Side)
DESCRIPTION The air mix control servo motor (air mix damper servo sub-assembly) is controlled by the A/C amplifier. The air mix control servo motor moves the air mix damper by rotating (normal, reverse) with electrical power from the A/C amplifier. This adjusts the mix ratio of the air t ...

Removal
HINT: On the RH side, use the same procedures as on the LH side. 1. REMOVE SLIDE DOOR Remove the rear door scuff plate (See page IR-7). Remove the back door scuff plate (See page ED- 214). Remove the quarter trim panel (See page IR-9). Remove the upper rail cushion from the rail. ...

Cellular Phone Registration Failure, Phone Directory Transfer Failure
INSPECTION PROCEDURE 1 CHECK CURRENT CONDITIONS Proceed to the next step according to the table below. RESULT 2 CHECK USING ANOTHER CELLULAR PHONE Check if the system functions using another Bluetooth compatible cellular phone. HINT:  Confirm that either the same or a di ...