Toyota Sienna 2010-2024 Owners Manual: Initialization
Items to initialize
The following items must be initialized for normal system operation after such cases as the battery being reconnected, or maintenance being performed on the vehicle.
|
Item |
When to initialize |
| Power sliding door (if equipped) | After reconnecting or changing the battery |
| Power back door (if equipped) | After reconnecting or changing the battery |
| Message indicating maintenance is required (U.S.A. only) | After the maintenance is performed |
| Tire pressure warning system | When changing the tire size |
Customizable features
Settings that can be changed using the audio system screen
Settings that can be changed using the multi-information display
Settings that can be changed by your Toyota dealer
Definition of s ...
Toyota Sienna Service Manual
 ...
Other materials:
Rear Airbag Sensor RH Circuit Malfunction
DTC B1154/38 Rear Airbag Sensor RH Circuit Malfunction
DESCRIPTION
The rear airbag sensor RH circuit consists of the center airbag sensor
assembly and rear airbag sensor
RH.
If the center airbag sensor assembly receives signals from the rear airbag
sensor RH, it judges whether or
not the ...
Basic repair hint
(a) HINTS ON OPERATIONS
BASIC REPAIR HINT
1
Attire
• Always wear a clean uniform.
• Hat and safety shoes must be worn.
2
Vehicle protection
Prepare a grille cover, fender cover, seat cover and floor mat before
starting the
operation.
3
...
Removal
1. REMOVE CHARCOAL CANISTER PROTECTOR
(a) Remove the 6 bolts and charcoal canister protector.
2. REMOVE CHARCOAL CANISTER ASSEMBLY
(a) Disconnect the fuel tank vent hose from the
charcoal canister.
(1) Push the connector deep inside.
(2) Pinch portion A.
(3) Pull out the connector.
...
