DTC P0607 Input Signal Circuit Malfunction
DESCRIPTION
This DTC indicates internal abnormalities of the ECM.
DTC No. |
Detection Item |
Trouble Area |
P0607 |
The ECM has a supervisory CPU and control ECU
inside. When each input STP signal is different for 0.15
sec. or more, this trouble code is output.
This trouble code is output after 0.4 sec. has passed from the time the cruise cancel input signal (STP input) is input into the ECM. HINT: When a trouble code is detected, the fail safe must be kept on until the ignition switch is turned off. |
ECM |
INSPECTION PROCEDURE
1 REPLACE ECM
END
Command list
Some recognizable voice commands and their actions are shown
below as examples.
Basic
Command
Action
“Help”
Prompts voice guidance to offer examples of commands
or operation methods
“Go Back”
Returns to the previous screen
Phone
...
Operation check
1. NOTICE WHEN CHECKING THE FOLLOWING
Power door lock/unlock function:
The wireless door lock control function operates
only when the following 3 conditions are met:
No key is inserted in the ignition key cylinder.
All the doors are closed.
The power door lock sys ...
On-vehicle inspection
1. INSPECT CAMSHAFT TIMING CONTROL VALVE ASSEMBLY
Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position.
Start the engine and warm it up.
Select the intelligent tester from the ACTIVE TEST
menu.
Check the engine speed ...