Toyota RAV4 manuals

Toyota Sienna Service Manual: Inspection

1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

 INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

  1.  Resistance inspection
  1.  Using an ohmmeter, measure the resistance between the terminals.

    Resistance: 6.9 to 7.9 Ω at 20C (68F) If necessary, replace the camshaft timing oil control valve assembly.

  1.  Movement inspection
  1.  Connect the positive (+) lead from the battery to terminal 1 and connect the negative (-) lead to terminal 2, and check the movement of the valve.

NOTICE: Confirm that the valve moves freely and does not stick in any position.

If necessary, replace the camshaft timing oil control valve assembly.

HINT: Accumulation of foreign objects causes subtle pressure leaks. The subtle pressure leaks will cause the cam to advance, and this will cause a DTC to be set.

On-vehicle inspection
1. INSPECT CAMSHAFT TIMING CONTROL VALVE ASSEMBLY  Connect the intelligent tester to the DLC3.  Turn the ignition switch to the ON position.  Start the engine and warm it up ...

Installation
1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2 Exhaust Side)  Apply a light coat of engine oil to the new O-ring and install it to the camshaft timing oil control v ...

Other materials:

DTC check / clear
1. DTC CHECK/CLEAR (USING INTELLIGENT TESTER:)  DTC check  Connect the intelligent tester to the DLC3. Turn the ignition switch to the ON position.  Read the DTCs on the tester screen.  DTC clear  Connect the intelligent tester to the DLC3. &n ...

Screen Flicker or Color Distortion
INSPECTION PROCEDURE 1 CHECK DISPLAY SETTING Enter the display adjustment screen by pressing the "DISPLAY" switch.  Reset display settings (contrast, brightness) and check that the screen appears normal Press the "INFO" switch and then select "S ...

Pressure Control Solenoid "B" Performance (Shift Solenoid Valve SL2)
SYSTEM DESCRIPTION The ECM uses signals from the vehicle speed sensor to detect the actual gear position (1st, 2nd, 3rd, 4th or 5th gear). Then the ECM compares the actual gear with the shift schedule in the ECM memory to detect mechanical problems of the shift solenoid valves, valve b ...

В© 2011-2024 Copyright www.tsienna.net