Toyota Sienna Service Manual: Inspection

Disassembly

1. REMOVE 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY (a) Place SST on the return spring and compress the return spring with a press. SST 09387-00060 (b) Using a screwdriver, remove the snap ...

Reassembly

1. INSTALL 2ND BRAKE PISTON O-RING (a) Coat 2 new O-rings with ATF, and install them in the 2nd brake piston. NOTICE: Make sure that the O-ring is not twisted or pinched. 2. INSTALL 2ND BRAK ...

Other materials:

Adjustment
1. INSPECT SHIFT LEVER POSITION (a) When shifting from P to R position only with ignition switch ON and brake pedal, make sure that the shifting lever moves smoothly and can be moderately operated. (b) When starting engine, make sure that the vehicle moves forward when shifting from N to D p ...

Inspection
1. INSPECT NO. 1 VALVE ROCKER ARM SUBASSEMBLY (a) Turn the roller by hand to check that it turns smoothly. HINT: If the roller does not turn smoothly, replace the valve rocker arm sub-assembly. 2. INSPECT VALVE LASH ADJUSTER ASSEMBLY NOTICE: Keep the lash adjuster free of dirt ...

Short to GND in Rear Curtain Shield Squib RH Circuit
DTC B1632/81 Short to GND in Rear Curtain Shield Squib RH Circuit DESCRIPTION The rear curtain shield squib RH circuit consists of the center airbag sensor assembly and the curtain shield airbag assembly RH. The circuit instructs the SRS to deploy when deployment conditions are met. DTC ...