Toyota RAV4 manuals

Toyota Sienna Service Manual: Inspection

1. INSPECT UNDERDRIVE PLANETARY GEAR PRELOAD

INSPECT UNDERDRIVE PLANETARY GEAR PRELOAD

(a) Using SST, fix the underdrive planetary gear assembly.

SST 09387-00050

INSPECT UNDERDRIVE PLANETARY GEAR PRELOAD

(b) Using SST and a torque wrench, measure the turning torque of the underdrive planetary gear assembly while rotating the torque wrench at 60 rpm.

SST 09387-00050 Turning torque at 60 rpm.: 0.50 to 1.42 N*m (5.1 to 14.5 kgf*cm, 4.4 to 12.6 in.*lbf)

HINT: Use a torque wrench with a fulcrum length of 160 mm (6.3 in.).

Disassembly
1. INSPECT UNDERDRIVE PLANETARY GEAR PRELOAD HINT: (See page AX-260) 2. REMOVE FRONT PLANETARY GEAR NUT (a) Using SST, loosen the staked part of the lock nut. SST 09930-00010 (09931-00010, ...

Reassembly
1. INSTALL UNDERDRIVE PLANETARY RING GEAR HINT: Use a torque wrench with a fulcrum length of 160 mm (6.3 in.). (a) Install a new snap ring to the outer race of the radial ball bearing rear. ...

Other materials:

Cruise Control Switch Circuit
DESCRIPTION The cruise control main switch operates 8 functions: SET, - (COAST), TAP-DOWN, RES (RESUME), + (ACCEL), TAP-UP, CANCEL, and MODE. The SET, TAP-DOWN, and - (COAST) functions, and the RES (RESUME), TAP-UP, and + (ACCEL) functions are operated with the same switch. The cruise contr ...

Control Module Performance
DTC P0607 Control Module Performance DESCRIPTION This DTC indicates a malfunction in the ECM. HINT: The ECM receives signals from each sensor to control all the functions of the cruise control with the microcomputer. When a malfunction is detected, fail-safe remains on until the ignition sw ...

Short in Side Squib RH Circuit
DTC B0110/43 Short in Side Squib RH Circuit DESCRIPTION The side squib RH circuit consists of the center airbag sensor assembly and the front seat side airbag assembly RH. The circuit instructs the SRS to deploy when deployment conditions are met. DTC B0110/43 is recorded when a short cir ...

В© 2011-2024 Copyright www.tsienna.net