1. INSTALL FRONT SUSPENSION ARM SUBASSEMBLY LOWER NO.1 LH
(a) Install the front lower arm bush stopper to the front suspension arm sub-assembly lower No.1 LH.
(b) Install the bolt and nut to the rear side of the front suspension arm sub-assembly lower No.1 LH.
Torque: 206 N*m (2,100 kgf*cm, 152 ft.*lbf)
(c) Install the 2 bolts on the front side of the front suspension arm sub-assembly lower No.1 LH.
Torque: 200 N*m (2,040 kgf*cm, 148 ft.*lbf)
2. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR
(a) Install the transverse engine engine mounting insulator with the 3 nuts.
Torque: 87 N*m (887 kgf*cm, 64 ft.*lbf)
3. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE
HINT: (See page EM-52)
Active head restraints
When the occupant’s lower back
presses against the seatback during
a rear-end collision, the head
restraint moves slightly forward
and upward to help reduce the
risk of whiplash on the seat occupant
Active head restraints
Even small forces applied to the seatback may cause the head rest ...
Correct use of the seat belts
Extend the shoulder belt so that
it comes fully over the shoulder,
but does not come into contact
with the neck or slide off the
shoulder.
Position the lap belt as low as
possible over the hips.
Adjust the position of the seatback.
Sit up straight and well
back in the seat.
...
Trailer towing
(with towing package)
Your vehicle is designed primarily as a passenger-and-load-carrying
vehicle. Towing a trailer can have an adverse impact on
handling, performance, braking, durability, and fuel consumption.
For your safety and the safety of others, you must not overload
your vehicle or trailer. You must also e ...