1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
2. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
3. CONNECT FRONT PASSENGER AIRBAG ASSEMBLY CONNECTOR
NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.
4. INSTALL INSTRUMENT PANEL BOX NO.2
5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
6. INSTALL STEERING COLUMN COVER
7. INSTALL STEERING WHEEL ASSEMBLY
8. INSPECT STEERING WHEEL CENTER POINT
9. INSTALL STEERING PAD
10. INSTALL STEERING WHEEL NO.2 COVER LOWER
11. INSTALL STEERING WHEEL NO.3 COVER LOWER
12. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
14. PERFORM INITIALIZATION
HINT: Some systems need initialization when disconnecting the cable from the negative battery terminal.
15. INSPECT SRS WARNING LIGHT
Open in Side Squib LH Circuit
DTC B0116/48 Open in Side Squib LH Circuit
DESCRIPTION
The side squib LH circuit consists of the center airbag sensor assembly and
the front seat side assembly
LH.
This circuit instructs the SRS to deploy when deployment conditions are met.
DTC B0116/48 is recorded when an open circuit is ...
AUX Port/USB Port
Connect an iPod, USB memory device or portable audio player
to the AUX port/USB port as indicated below. Select “iPod”,
“USB” or “AUX” on the audio source selection screen and the
device can be operated via audio system.
Connecting using the AUX port/USB port
iPod
Open the cove ...
Precaution
Caution:
The vehicle is equipped with a supplemental restraint
system (srs). It consists of a driver airbag, front
passenger airbag, front seat side airbag, curtain shield
airbag, and front seat belt pretensioner. Failure to
carry out service operations in the correct sequ ...