1. INSTALL OCCUPANT CLASSIFICATION ECU
CAUTION: After disconnecting the negative battery terminal, wait for at least 90 seconds before starting the operation.
NOTICE:
2. INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)
3. INSTALL FRONT RH SEAT ASSEMBLY (for Power Seat)
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. PERFORM INITIALIZATION
HINT: Some systems need initialization when disconnecting the cable from the negative battery terminal.
6. INSPECT SLIDE ADJUSTER LOCK (for Manual Seat)
7. INSPECT POWER SEAT OPERATION (for Power Seat)
8. INSPECT SEAT HEATER OPERATION (w/ Seat Heater System)
9. INSPECT SRS WARNING LIGHT
Disassembly
1. REMOVE GENERATOR CLUTCH PULLEY
(A) using a screwdriver, remove the generator pulley
cap.
(b) Set SST (A) and (B).
SST 09820-63020
(c) Clamp SST (A) in a vise.
NOTICE:
Be sure to fix the flat surface of SST (A) in a
vise.
(d) Place the rotor shaft end int ...
Disc cannot be Played/ No Playable Files/ Copyright Protection Error
DTC 63-7D Disc cannot be Played
DTC 63-7E No Playable Files
DTC 63-7F Copyright Protection Error
DESCRIPTION
DTC No.
DTC Detection Condition
Trouble Area
63-7D
An incompatible MP3 / WMA file is used.
Although the file has an extension of &quo ...
Camshaft Position Sensor "A" Circuit
DTC P0340 Camshaft Position Sensor "A" Circuit (Bank 1
or Single Sensor)
DTC P0342 Camshaft Position Sensor "A" Circuit Low
Input (Bank 1 or Single Sensor)
DTC P0343 Camshaft Position Sensor "A" Circuit High
Input (Bank 1 or Single Sensor)
DTC P0345 Camshaft Posit ...