Toyota RAV4 manuals

Toyota Sienna Service Manual: Installation

1. INSTALL AMPLIFIER ANTENNA ASSEMBLY

  1.  Engage the 16 clamps to install the amplifier antenna assembly.
  2.  Install the 3 bolts.

INSTALL AMPLIFIER ANTENNA ASSEMBLY

  1. Connect the connectors.

2. INSTALL ROOF HEADLINING ASSEMBLY

3. INSTALL ANTENNA ASSEMBLY WITH HOLDER

INSTALL ANTENNA ASSEMBLY WITH HOLDER

  1.  Install the antenna assembly with holder with the nut.

INSTALL ANTENNA ASSEMBLY WITH HOLDER

  1. Install the bolt and connect the connector.

4. INSTALL ANTENNA ORNAMENT

INSTALL ANTENNA ORNAMENT

  1.  Install the antenna ornament.

5. INSTALL PULL TOP ANTENNA POLE SUBASSEMBLY

6. INSTALL ANTENNA CORD SUB-ASSEMBLY

  1. Engage the 5 clamps to install the antenna cord sub-assembly.

INSTALL ANTENNA CORD SUB-ASSEMBLY

7. INSTALL INSTRUMENT PANEL SAFETY PAD SUBASSEMBLY

Removal
1. REMOVE INSTRUMENT PANEL SAFETY PAD SUBASSEMBLY 2. REMOVE ANTENNA CORD SUB-ASSEMBLY  Replace the 5 clamps and remove the antenna cord sub-assembly. 3. REMOVE PULL TOP ANTENNA POLE S ...

Radio antenna pole
COMPONENTS REMOVAL 1. REMOVE PULL TOP ANTENNA POLE SUBASSEMBLY  Remove the pull top antenna pole sub-assembly by pulling it the arrow direction in the illustration. INSTALLATION ...

Other materials:

Short in Side Squib RH Circuit
DTC B0110/43 Short in Side Squib RH Circuit DESCRIPTION The side squib RH circuit consists of the center airbag sensor assembly and the front seat side airbag assembly RH. The circuit instructs the SRS to deploy when deployment conditions are met. DTC B0110/43 is recorded when a short cir ...

Installation
1. INSTALL ACCELERATOR PEDAL ROD NOTICE:  Avoid physical shock to the accelerator pedal assembly.  Do not disassemble the accelerator pedal assembly.  Install the accelerator pedal rod with the 2 nuts. Torque: 4.9 N*m (50 kgf*cm, 43 in.*lbf)  Connect the ...

Key Lock-in Prevention Function does not Work Properly (Manual Operation and Operation Interlocked with Key are Active)
DESCRIPTION The un-lock warning switch turns ON when the key is inserted in the ignition key cylinder. The courtesy light switch turns ON when the driver side door is opened. These 2 switches are monitored by the body ECU. In order to prevent the key from being locked in, the body ECU cont ...

В© 2011-2024 Copyright www.tsienna.net