Toyota Sienna Service Manual: Installation
1. INSTALL ACCELERATOR PEDAL ROD
NOTICE:
- Avoid physical shock to the accelerator pedal assembly.
- Do not disassemble the accelerator pedal assembly.
- Install the accelerator pedal rod with the 2 nuts.
Torque: 4.9 N*m (50 kgf*cm, 43 in.*lbf)
- Connect the accelerator pedal position sensor connector.
Removal
1. REMOVE ACCELERATOR PEDAL ROD
Disconnect the accelerator pedal position sensor
connector.
Remove the 2 nuts and accelerator pedal rod.
...
Mass air flow meter
Components
...
Other materials:
Installation
1. INSTALL SIDE REAR WINDOW WEATHERSTRIP LH
2. INSTALL QUARTER WINDOW LOCK ASSEMBLY LH
3. INSTALL POWER VENT WINDOW MOTOR
ASSEMBLY LH
4. INSTALL SIDE WINDOW ASSEMBLY REAR LH
5. INSTALL RR WINDOW SIDE GARNISH ASSEMBLY
LH
6. INSTALL RR WINDOW SIDE GARNISH ASSEMBLY
NO.2 LH
7. REMOVE QUARTER TR ...
Bluetooth Module Initialization Failed
DTC 57-47 Bluetooth Module Initialization Failed
DESCRIPTION
DTC No.
DTC Detection Condition
Trouble Area
57-47
Bluetooth module is not installed.
Problem with Bluetooth module
Problem in communication line to Bluetooth module
...
Trailer Tongue Weight
A recommended tongue weight varies in accordance with the types
of trailers or towing as described below.
To ensure the recommended values shown below, the trailer must
be loaded by referring to the following instructions.
Tongue Weight
The gross trailer weight should be distribute ...
