Toyota Sienna Service Manual: Installation
1. INSTALL FRONT SEAT ASSEMBLY RH
- Place the seat assembly in the cabin.
NOTICE: Be careful not to damage the body.
- Connect the connectors under the seat assembly.
- Tighten the 2 bolts on the front side of the seat
assembly.
Torque: 37 N*m (375 kgf*cm, 27 ft.*lbf)
- Tighten the 2 bolts on the rear side of the seat
assembly.
Torque: 37 N*m (375 kgf*cm, 27 ft.*lbf)
- Install the 2 track covers.
2. INSTALL FRONT SEAT HEADREST ASSEMBLY
3. CHECK SRS WARNING LIGHT
4. CHECK SEAT SLIDE ADJUSTER LOCKS
5. INITIALIZE OCCUPANT CLASSIFICATION SYSTEM
Reassembly
1. INSTALL FRONT SEAT CUSHION SHIELD LOWER LH
Install the front seat cushion shield lower LH.
2. INSTALL FRONT SEAT CUSHION SHIELD LOWER
RH
3. INSTALL RECLINING ADJUSTER INSIDE COVER LH ...
Front seat assembly (for Manual Seat)
COMPONENTS
...
Other materials:
Front No. 2 speaker
COMPONENTS
ON-VEHICLE INSPECTION
1. INSPECT FRONT NO.2 SPEAKER
HINT:
Remove interior parts so that the front No.2 speaker can
be seen.
Check the speaker installation.
OK:
The speaker is securely installed.
If the result is not as specified, reinstall the front
No.2 speak ...
Key Lock-in Prevention Function does not Work Properly (Manual
Operation and Operation Interlocked with Key are Active)
DESCRIPTION
The un-lock warning switch turns ON when the key is inserted in the ignition
key cylinder. The courtesy
light switch turns ON when the driver side door is opened. These 2 switches are
monitored by the body
ECU.
In order to prevent the key from being locked in, the body ECU cont ...
Personal light assembly
ON-VEHICLE INSPECTION
1. ROOF CONSOLE BOX ASSEMBLY
Inspect map light assembly resistance.
Check the resistance between the terminals at
each switch position as shown in the chart.
Resistance
...
