Toyota Sienna Service Manual: Installation

Toyota Sienna Service Manual / Seat / Rear no. 1 Seat assembly (for Captain Seat Type) / Installation

1. INSTALL REAR NO. 1 SEAT ASSEMBLY LH

Place the seat in the cabin.

NOTICE: Be careful not to damage the body.
Install the seat.
7-Passenger RH: Install the seat belt anchor plate with the bolt.
Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)
Install the headrest.
When sliding the seat, check that the both sides of the adjuster lock simultaneously.

HINT: Check that the seat adjuster locks.

Reassembly

1. INSTALL NO. 1 SEAT CUSHION FRAME SUBASSEMBLY LH Install the seat cushion frame with the bolt. Torque: Except 7-Passenger RH, M8 bolt 20.6 N*m (210 kgf*cm, 15 ft.*lbf) M10 bolt 41 ...

Rear no. 1 Seat assembly (for Center Seat)

...

Other materials:

Horn
To sound the horn, press on or close to the mark. WARNINGCaution while driving Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and cause an accident, resulting in death or serious injury. After adjusting the steeri ...

Power slide door warning buzzer
INSPECTION 1. INSPECT POWER SLIDE DOOR WARNING BUZZER LH Check the resistance of the buzzer. Resistance If the result is not as specified, replace the buzzer. NOTICE: The circuit that causes the buzzer to sound is built into the slide door ECU, not around the buzzer. Direct ...

Towing related terms
GCWR (Gross Combination Weight Rating) The maximum allowable gross combination weight. The gross combination weight is the sum of the total vehicle weight (including the occupants, cargo and any optional equipment installed on the vehicle) and the weight of the trailer being towed (incl ...