1. INSTALL FRONT BUMPER ASSEMBLY
HINT:
Torque: 7.0 N*m (71 kgf*cm, 62.0 in.*lbf)
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
3. VEHICLE PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) (See page LI-82)
4. PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) (See page LI-83)
5. FOG LIGHT AIMING INSPECTION (w/ Fog Light) (See page LI-84)
6. FOG LIGHT AIMING ADJUSTMENT (w/ Fog Light)
Operation flow
HINT:
Perform troubleshooting in accordance with the
procedures below. The following is an outline of basic
troubleshooting procedures. Confirm the troubleshooting
procedures for the circuit you are working on before
beginning troubleshooting.
VEHICLE BROUGHT TO WORKSHOP
CUSTOMER PR ...
Sliding door child-protector locks
The sliding door cannot be
opened by the inside door handle
and the second seat sliding door
switch when the lock is set.
Unlock
Lock
These locks can be set to prevent
children from opening the sliding
doors. Push down on each sliding
door switch to lock that sliding
door.
The p ...
Fuel pump resistor
Components
REMOVAL
1. REMOVE FUEL PUMP RESISTOR
(a) Disconnect the connector.
(b) Remove the nut and fuel pump resistor.
INSPECTION
1. INSPECT FUEL PUMP RESISTOR
(a) Inspect fuel pump resistor.
(1) Using an ohmmeter, measure the resistance
between the terminals.
Standard resi ...