Toyota Sienna Service Manual: Installation
1. INSTALL REAR DOOR WINDOW FRAME MOULDING
- Remove the tape from the rear door window frame moulding.
- Clean the contact surface of the vehicle body with white gasoline.
- Clean the outer circumference of the rear door window frame moulding with white gasoline.
- Apply new double-sided tape to the rear door window frame moulding, as shown in the illustration.
Dimensions:
- Using a heat light, heat the vehicle body and rear door window frame moulding.
Heating temperature:
NOTICE: Do not heat the body and rear door window frame moulding excessively.
- Remove the peeling paper from the face of the rear
door window frame moulding face.
HINT: Be careful that dirt or foreign objects do not stick to the adhesive part when removing the peeling paper.
- Engage the 2 claws and install the rear door window frame moulding with the screw.
NOTICE: Do not apply excessive force onto the rear door window frame moulding, but steady pressure with your thumbs.
2. INSTALL REAR DOOR WINDOW REAR FRAME MOULDING
- Remove the tape from the rear door window rear frame moulding.
- Clean the contact surface of the vehicle body with white gasoline.
- Clean the outer circumference of the rear door window rear frame moulding with white gasoline.
- Apply new double-sided tape to the rear door window rear frame moulding, as shown in the illustration.
Dimensions:
- Using a heat light, heat the vehicle body and rear door window rear frame moulding.
Heating temperature:
NOTICE: Do not heat the body and rear door window rear frame moulding excessively.
- Remove the peeling paper from the face of the rear
door window rear frame moulding face.
HINT: Be careful that dirt or foreign objects do not stick to the adhesive part when removing the peeling paper.
- Engage the 2 claws and install the rear door window rear frame moulding with the screw.
NOTICE: Do not apply excessive force onto the rear door window rear frame moulding, but steady pressure with your thumbs.
Removal
1. REMOVE REAR DOOR WINDOW FRAME MOULDING
Remove the screw.
Using a heat light, heat the rear door window frame
moulding between 40 to 60 C (104 to 140 F).
NOTICE:
Do not heat the rear ...
Front fender garnish
COMPONENTS
...
Other materials:
Quarter windows
The quarter windows can be opened to bring in fresh outside air
for additional ventilation.
Opening and closing procedures
Manual type
Pull the handle and swing the window
fully out to open.
Power type
Opening
Closing
Both the left and right quarter windows
move.
T ...
Installation
1. INSTALL COMBINATION METER ASSEMBLY
Connect the connectors.
Install the combination meter assembly with the 4
screws.
2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Install the instrument cluster finish panel subassembly
with the 4 clips.
3. C ...
Solar Sensor Circuit (Passenger Side)
DTC B1421/21 Solar Sensor Circuit (Passenger Side)
DESCRIPTION
The solar sensor, which is installed on the upper side of the instrument
panel, detects sunlight and
controls the air conditioning in AUTO mode. The output voltage from the solar
sensor varies according to
the amount of sunli ...
