DTC U1102 Lost Communication with Radar Sensor
DESCRIPTION
The laser sensor and distance control ECU transmit the data for general vehicle control and diagnosis function along the communication line. The distance control ECU determines the curve radius information based on signals from the steering wheel and yaw rate sensor. The distance control ECU transmits the current vehicle speed and curve radius information to the laser sensor.
DTC No. |
DTC Detection Condition |
Trouble Area |
U1102 |
The ECM detects a communication error signal (from the distance control ECU to the laser sensor) for 0.15 sec. or more while the dynamic laser cruise control is in operation |
|
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
1 CHECK HARNESS AND CONNECTOR (DISTANCE CONTROL ECU - LASER SENSOR)
Standard resistance
2 CHECK DISTANCE CONTROL ECU
Standard voltage
3 CHECK DTC OUTPUT
Result
END (INTERMITTENT PROBLEM IS PRESENT)
If you have a flat tire
(vehicles with a compact
spare tire)
Your vehicle is equipped with a spare tire. The flat tire can be
replaced with the spare tire.
For details about tires:
WARNINGIf you have a flat tire
Do not continue driving with a flat tire.
Driving even a short distance with a flat tire can damage the tire and
the
wheel ...
Door control transmitter
INSPECTION
1. INSPECT DOOR CONTROL TRANSMITTER
Inspect operation of the transmitter.
Remove the battery (lithium battery) from the transmitter.
Install a new or normal battery (lithium battery).
When a new or normal battery is not available,
connect 2 new ...
Other functions
Switching between outside air and recirculated air modes
Press .
The mode switches between outside air mode (
appears on the
display) and recirculated air mode (
appears on the display) each
time the button is pressed.
Defogging the windshield
Defoggers are used to defog the windshield a ...