DESCRIPTION
If the manual UP/DOWN function does not operate, no power may be supplied to the power window master switch or the power window motor. The power window master switch itself or the wire harness may be malfunctioning.
WIRING DIAGRAM
INSPECTION PROCEDURE
1 INSPECT FUSE (P/W)
Standard resistance: Below 1 Ω
2 CHECK WIRE HARNESS (TERMINAL BW)
Standard voltage
3 INSPECT POWER WINDOW MASTER SWITCH
Standard resistance
4 CHECK WIRE HARNESS (MASTER SWITCH - MOTOR) (MASTER SWITCH - BODY GROUND))
Standard resistance
Standard resistance
NOTICE: Do not apply battery voltage to any terminals except terminals 1 and 2.
Standard
REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (DRIVER SIDE)
Inspection
1. INSPECT OIL PUMP ASSEMBLY
(a) Turn the drive gear with the 2 screwdrivers and
make sure that it rotates smoothly.
NOTICE:
Be careful not to damage the oil seal lip.
2. INSPECT CLEARANCE OF OIL PUMP ASSEMBLY
(a) Push the driven gear to one side of the body.
(b) Using ...
Repair
1. STEERING OFF CENTER REPAIR PROCEDURE
(a) Inspect steering wheel off center.
(1) Apply masking tape to the top center of the
steering wheel and steering column upper
cover.
(2) Drive the vehicle in a straight line for 100
meters at a constant speed of 35 mph (56 km/
h), and hold the ...
Customize parameters
HINT:
The following items can be customized.
NOTICE:
After confirming whether the items requested by the
customer are applicable or not for customization,
perform the customize operation.
Be sure to record the current settings before
customizing.
When troubleshootin ...