Toyota Sienna Service Manual: Parking brake cable

Installation

1. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY (a) Install the parking brake control pedal assembly with a bolt and the 2 nuts. Torque: 39 N*m (398 kgf*cm, 29 ft.*lbf) (b) Connect the parki ...

Removal

HINT: For the parking brake cable assembly No. 2, perform the same procedure to the parking brake cable assembly No. 3. 1. REMOVE REAR WHEEL 2. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY (for Drum Type) ...

Other materials:

Cooling system
On-vehicle inspection 1. INSPECT FOR COOLANT LEAK CAUTION: Do not remove the radiator cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns. NOTICE: Before performing each inspection, turn the A/ ...

Pressure Control Solenoid "A" Electrical (Shift Solenoid Valve SL1)
DESCRIPTION Shifting from 1st to 5th is performed in combination with "ON" and "OFF" operation of the shift solenoid valves SL1, SL2, SL3, S4 and SR which are controlled by the ECM. If an open or short circuit occurs in either of the shift solenoid valves, the ECM cont ...

Speedometer Malfunction
DESCRIPTION Factors that affect the indicated vehicle speed include tire size, tire inflation, and tire wear. The speed indicated on the speedometer has an allowable margin of error. This can be tested using a speedometer tester (calibrated chassis dynamometer). For details about testing and ...