Toyota Sienna Service Manual: Player Error
DTC 58-44 Player Error
DTC 80-44 Player Error
DESCRIPTION
|
DTC No. |
DTC Detection Condition |
Trouble Area |
|
58-44 |
Map player error is detected | Radio and navigation assembly |
|
80-44 |
Map player error is detected. |
INSPECTION PROCEDURE
HINT: After the inspection is completed, clear the DTCs.
1 CHECK RADIO AND NAVIGATION ASSEMBLY
- Check if a disc can be inserted or ejected normally.
OK: A disc can be inserted or ejected normally.
2 DTC CLEAR AND RECHECK
- Clear the DTCs.
- Recheck for DTCs and check if the same trouble occurs again.
OK: Same problem does not occur.
REPLACE RADIO AND NAVIGATION ASSEMBLY
SPD Signal Error
DTC 58-43 SPD Signal Error
DTC 80-43 SPD Signal Error
DESCRIPTION
DTC No.
DTC Detection Condition
Trouble Area
58-43
A difference between the GPS speed and SPD ...
High Temperature
DTC 58-45 High Temperature
DTC 80-45 High Temperature
DESCRIPTION
DTC No.
DTC Detection Condition
Trouble Area
58-45
High map disc player temperature is det ...
Other materials:
Engine Immobiliser System Malfunction
DTC B2799 Engine Immobiliser System Malfunction
DESCRIPTION
This DTC is output when the ECM detects errors in communication between the
transponder key ECU
and the ECM, or in the communication lines. This DTC is also output when an
engine start is attempted
while the ECU communication ID bet ...
Shift position purpose
*1: Shifting to the D position allows the system to select a gear suitable
for
the driving conditions. Setting the shift lever to the D position is recommended
for normal driving.
*2: Selecting shift ranges using S mode restricts the upper limit of the
possible
gear ranges, controls en ...
Installation
1. INSTALL BRAKE MASTER CYLINDER
(a) Install the brake master cylinder with the 2 nuts.
Torque: 13 N*m (130 kgf*cm, 9 ft.*lbf)
(b) Slide the clip and connect the brake master cylinder
reservoir hose.
(c) Using SST, connect the 2 brake tube to the brake
master cylinder.
SST 09023-001 ...
