Toyota Sienna Service Manual: Power back door main switch
INSPECTION
1. INSPECT POWER BACK DOOR MAIN SWITCH
- Inspect the resistance of the main switch.
Resistance
If the result is not as specified, replace the switch.
- Apply battery voltage and check the illuminates.
OK
HINT: Whether the switch illuminates or not will not affect the function of the LH side.
If the result is not as specified, replace the bulb.
Reassembly
1. INSTALL BACK DOOR STOPPER LOWER
Install the 2 stoppers with the 4 bolts.
Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf)
2. INSTALL BACK DOOR BASE STOPPER BRACKET
Install the 2 brackets with t ...
Power back door opener / closer switch
INSPECTION
1. INSPECT SATELLITE SWITCH
Inspect the resistance of the back door switch.
Resistance
If the result is not as specified, replace the switch.
Apply battery voltage and ch ...
Other materials:
PCS (Pre-Collision
System)
When the radar sensor detects possibility of a frontal collision,
the pre-collision system such as the brakes and seat belts are
automatically engaged to lessen impact as well as vehicle damage.
Pre-collision warning
When a high possibility of a
frontal collision is detected, the
pre-colli ...
Indicator Circuit
DESCRIPTION
The indicator displays the location of the obstacle and the approximate
distance between the vehicle and
the obstacle either by blinking or turning on.
WIRING DIAGRAM
INSPECTION PROCEDURE
1 CHECK HARNESS AND CONNECTOR (CLEARANCE WARNING ECU - AIR CONDITIONER
AMPLIFIER)
...
Adjustment
1. INSPECT SHIFT LEVER POSITION
(a) When shifting from P to R position only with ignition
switch ON and brake pedal, make sure that the
shifting lever moves smoothly and can be
moderately operated.
(b) When starting engine, make sure that the vehicle
moves forward when shifting from N to D p ...
