Toyota Sienna Service Manual: Power back door warning buzzer
INSPECTION
1. POWER BACK DOOR WARNING BUZZER
- Check the resistance of the buzzer.
Resistance
If the result is not as specified, replace the buzzer.
NOTICE:
- The circuit that causes the buzzer to sounds is built into the back door ECU, not around the buzzer.
- Directly applying battery voltage to the buzzer does not cause the buzzer to sound.
Power back door drive unit
INSPECTION
1. INSPECT POWER BACK DOOR DRIVE UNIT
Remove the unit.
Apply battery voltage to the terminals and check the
motor operation.
Standard
If the result is not as specified, ...
Back door support
COMPONENTS
...
Other materials:
Tire Pressure Warning Reset Switch Circuit
DESCRIPTION
The ECU enters the initialization mode and performs initialization
automatically, when the tire pressure
warning ECU receives the signal from the tire pressure warning reset switch. If
the ECU receives the
signal, the tire pressure warning light blinks 3 times (1 second on, 1 seco ...
Do-it-yourself service
precautions
If you perform maintenance yourself, be sure to follow the correct
procedure as given in these sections.
Items
Parts and tools
Battery condition
Warm water
Baking soda
Grease
Conventional wrench (for terminal clamp bolts)
Brake ...
Engine immobiliser system
PARTS LOCATION
SYSTEM DESCRIPTION
The engine immobiliser system has been designed to prevent
the vehicle from being stolen. This system uses a
transponder key ECU that stores the key code of the
authorized ignition key. If an attempt is made to start the
engine using a non-authorized key, ...
