Toyota Sienna Service Manual: Power outlet socket

Installation

1. INSTALL CIGARETTE LIGHTER ASSEMBLY  Engage the 2 claws to install the cigarette lighter assembly.  Install the cigarette lighter knob. 2. INSTALL CIGARETTE LIGHTER COVER ...

Removal

1. REMOVE REAR DOOR SCUFF PLATE LH 2. REMOVE REAR DOOR WEATHERSTRIP LH 3. REMOVE BACK DOOR WEATHERSTRIP 4. REMOVE BACK DOOR SCUFF PLATE 5. REMOVE QUARTER TRIM FRONT PANEL ASSEMBLY LH 6. REMOVE PO ...

Other materials:

Installation
1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY  Install the front passenger airbag assembly with the 2 screws. 2. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY 3. CONNECT FRONT PASSENGER AIRBAG ASSEMBLY CONNECTOR  Connect the connector to the front passenger airbag assembly. ...

Inspection
1. INSPECT HEATED OXYGEN SENSOR (for Bank 1 Sensor 2) (a) Measure the resistance of the sensor. Standard resistance If the resistance is not as specified, replace the sensor. 2. INSPECT HEATED OXYGEN SENSOR (for Bank 2 Sensor 2) (a) Measure the resistance of the sensor. Standard r ...

VSC Warning Light Remains ON
DESCRIPTION The skid control ECU is connected to the combination meter via CAN and multiplex communications. If the skid control ECU stores DTCs to shut down TRAC and VSC operation, the VSC warning light comes on in the combination meter. WIRING DIAGRAM INSPECTION PROCEDURE NOTICE: ...