DESCRIPTION
When the switch on the transmitter is operated during normal operating conditions, the multiplex network body ECU sends a request signal to the master switch and the regulator switches which then drive the applicable power window motors.
INSPECTION PROCEDURE
1 CHECK WIRELESS DOOR LOCK CONTROL FUNCTIONS
HINT: When the wireless door LOCK/UNLOCK operation can be performed, it means that the wireless signal from the transmitter is properly input to the multiplex network body ECU.
2 CHECK MANUAL UP/DOWN FUNCTION
3 CHECK REMOTE UP/DOWN FUNCTION
REPLACE MULTIPLEX NETWORK BODY ECU
DVD Error/ Excess Current/ Tray Insertion / Ejection Error
DTC 44-44 DVD Error
DTC 44-48 Excess Current
DTC 44-50 Tray Insertion / Ejection Error
DESCRIPTION
DTC No.
DTC Detecting Condition
Trouble Area
44-44
Operation error in the DVD mechanism.
Television display assembly
44-48
Excess current is ...
Installation
1. INSTALL BRAKE VACUUM CHECK VALVE
ASSEMBLY
(a) Install the brake vacuum check valve assembly and
check valve grommet to the brake booster
assembly.
2. INSTALL BRAKE BOOSTER GASKET
(a) Install a new brake booster gasket to the brake
booster with master cylinder.
3. INSTALL BRAKE MASTER CYLI ...
If the battery is
discharged
The following procedures may be used to start the engine if the
vehicle’s battery is discharged.
You can call your Toyota dealer or qualified repair shop.
If you have a set of jumper (or booster) cables and a second vehicle
with a 12-volt battery, you can jump start your vehicle by following ...