Toyota Sienna Service Manual: Power window regulator motor
INSPECTION
1. INSPECT POWER WINDOW REGULATOR MOTOR (FRONT RH)
- Remove the power window regulator motor.
- Apply battery voltage to the motor connector according to the table below.
NOTICE: Do not apply battery to any terminals except terminals 1 and 2.
Standard
2. INSPECT POWER WINDOW REGULATOR MOTOR (FRONT LH)
- Remove the power window regulator motor.
- Apply battery voltage to the motor connector according to the table below.
NOTICE: Do not apply battery to any terminals except terminals 1 and 2.
Standard
3. INSPECT POWER WINDOW REGULATOR NOTOR (REAR RH)
- Remove the power window regulator motor.
- Apply battery voltage to the motor connector according to the table below.
NOTICE: Do not apply battery to any terminals except terminals 1 and 2.
Standard
4. INSPECT POWER WINDOW REGULATOR MOTOR (REAR LH)
- Remove the power window regulator motor.
- Apply battery voltage to the motor connector according to the table below.
NOTICE: Do not apply battery to any terminals except terminals 1 and 2.
Standard
Rear power window switch
INSPECTION
1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY REAR
Check the resistance between the switch terminals
when the switch is operated.
Standard
If the result is not as ...
Windshield glass
COMPONENTS
...
Other materials:
Throttle / Pedal Position Sensor / Switch "A/B"
Circuit
DTC P0120 Throttle / Pedal Position Sensor / Switch "A"
Circuit
DTC P0122 Throttle / Pedal Position Sensor / Switch "A"
Circuit Low Input
DTC P0123 Throttle / Pedal Position Sensor / Switch "A"
Circuit High Input
DTC P0220 Throttle / Pedal Position Sensor / Switch ...
Removal
CAUTION:
Wear safety gloves, because the sharp surfaces of the
seatback frame and seat adjuster may injure your
hand.
Work must be started more than 90 seconds after the
ignition switch is turned to the LOCK position and the
negative (-) terminal cable is disconnected from ...
Selecting conventional constant speed control mode
Constant speed control mode differs from vehicle-to-vehicle distance
control mode. When constant speed control mode is selected, your
vehicle will maintain a set speed regardless of whether or not there
are other vehicles in the lane ahead.
Press the “ON-OFF” button to
activate the ...
