Toyota RAV4 manuals

Toyota Sienna Service Manual: Pressing Power Switch does not Turn on System

Toyota Sienna Service Manual / Navigation / Navigation system / Diagnostic trouble code chart / Pressing Power Switch does not Turn on System

INSPECTION PROCEDURE

1 CHECK CABIN

  1. Check that conditions in the cabin are not likely to cause condensation.

HINT: This problem occurs when the cabin is humid and the temperature rapidly changes. This condition may produce condensation, resulting in a short circuit.

OK: Condensation is not likely to occur.

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE

Noise Occurs
INSPECTION PROCEDURE 1 NOISE CONDITION Check in which direction the noise comes from (front left or right, or rear left or right).  Check in which direction the noise comes from. ...

No Sound can be Heard from Speakers
INSPECTION PROCEDURE 1 CHECK AUDIO SETTINGS Enter the sound adjustment screen by pressing the "SOUND" switch on the AUDIO display.  Set volume, fader, and balance to the in ...

Other materials:

Calibration
1. SELECT COMPASS DISPLAY MODE  The MODE switch allows you to select the Display or Non-display mode of the compass. HINT: In compass display mode, the display indicates outside temperature/average fuel consumption/ instantaneous fuel consumption/distance to empty with compass. 2. ...

Removal and installation of engine intake parts
REMOVAL AND INSTALLATION OF ENGINE INTAKE PARTS (a) If any metal particles enter inlet system parts, this may damage the engine. (b) When removing and installing inlet system parts, cover the openings of the removed parts and engine openings. Use gummed tape or other suitable materials ...

Reassembly
1. INSTALL NO. 1 COOLER THERMISTOR (a) Install the No. 1 cooler thermistor as shown in the illustration. NOTICE: Be sure to insert the thermistor only once because reinserting it will not allow it to be firmly secured. When reusing the evaporator, insert the thermistor one row ne ...

В© 2011-2024 Copyright www.tsienna.net