Toyota Sienna Service Manual: Problem symptoms table

Toyota Sienna Service Manual / Seat / Rear no. 2 Seat assembly (w/ Power Stowing Function) / Problem symptoms table

HINT:

Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspect Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed.
Replace parts as necessary.
Inspect the fuse and relays related to the system before inspecting the suspected areas below.

POWER REAR NO. 2 SEAT with STOWING FUNCTION

Symptom	Symptom Suspected area
No functions operate.	Power source circuit Fold seat control ECU
The folding-down function does not operate.	Park/Neutral position switch circuit Back door courtesy switch circuit Lock switch circuit Reclining motor circuit Fold seat switch circuit Folding motor circuit Folding motor Fold seat control ECU
The return function does not operate.	Park/Neutral position switch circuit Back door courtesy switch circuit Reclining motor circuit Folding motor circuit Fold seat switch circuit Release actuator circuit Folding motor Release actuator Fold seat control ECU
The stowing function does not operate.	Park/Neutral position switch circuit Back door courtesy switch circuit Reclining motor circuit Folding motor circuit Fold seat switch circuit Fold lock switch circuit Folding motor Fold seat control ECU
The reclining function does not operate.	Lock switch circuit Reclining motor circuit Rear power seat switch circuit Fold seat control ECU
The indicator does not come on or blink.	Indicator circuit Fold seat control ECU

Initialization

HINT: The seatback position is initialized at the factory before shipment, so initialization is not normally required. There is an initialization function for cases when reinitializati ...

Terminals of ECU

1. FOLD SEAT CONTROL ECU LH Disconnect the fold seat control ECU connectors. Measure the voltage and resistance of the wire harness side connectors. If the result is not as specifie ...

Other materials:

Side Airbag Sensor Assembly LH Circuit Malfunction
DTC B1141/33 Side Airbag Sensor Assembly LH Circuit Malfunction DESCRIPTION The side airbag sensor LH circuit consists of the center airbag sensor assembly and side airbag sensor LH. If the center airbag sensor assembly receives signals from the side airbag sensor LH, it judges whether or ...

Terminals of ECU
1. JUNCTION CONNECTOR Junction connector with VSC HINT: *1: with Dynamic laser cruise control without VSC CAN junction connector (with VSC) with VSC The connection diagram of the components which are connected to the CAN junction connector. 2. DLC3 ...

Open in Front Passenger Side Squib 2nd Step Circuit
DTC B1186/58 Open in Front Passenger Side Squib 2nd Step Circuit DESCRIPTION The front passenger side squib 2nd step circuit consists of the center airbag sensor assembly and the front passenger airbag assembly. The circuit instructs the SRS to deploy when deployment conditions are met. ...