Toyota RAV4 manuals

Toyota Sienna Service Manual: Radio Receiver Power Source Circuit

DESCRIPTION

This circuit provides power to the radio receiver.

WIRING DIAGRAM

WIRING DIAGRAM

INSPECTION PROCEDURE

1 INSPECT RADIO RECEIVER ASSEMBLY

INSPECT RADIO RECEIVER ASSEMBLY

  1. Disconnect the radio receiver connector.
  2. Measure the resistance according to the value in the table below.

Standard resistance

Standard resistance

  1. Measure the voltage according to the values in the table below.

Standard voltage

Standard voltage

*1: 10 Speaker without Navigation System
*2: 6 Speaker with Rear Seat Entertainment System
*3: 6 Speaker without Rear Seat Entertainment System

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE

Television Display Assembly Communication Error
INSPECTION PROCEDURE 1 IDENTIFY THE COMPONENT SHOWN BY THE SUB-CODE Enter the diagnostic mode. Press the preset switch "3" to change to "Detailed Information Mode" ...

Stereo Component Amplifier Power Source Circuit
DESCRIPTION This circuit provides power to the stereo component amplifier. WIRING DIAGRAM INSPECTION PROCEDURE 1 INSPECT STEREO COMPONENT AMPLIFIER Disconnect the stereo component ampl ...

Other materials:

Rear Clearance Sonar Sensor RH Circuit
DESCRIPTION An ultrasonic sensor consists of a sensor portion that transmits and receives ultrasonic waves and a preamplifier that amplifies them. The ultrasonic sensor outputs the ultrasonic waves and sends the received signals to the clearance warning ECU. WIRING DIAGRAM INSPECTION PR ...

Battery
Check the battery as follows: Battery exterior Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. Terminals Hold-down clamp Before recharging When recharging, the battery produces hydrogen gas which is flammable an ...

Seat Position Airbag Sensor Circuit Malfunction
DTC B1153/25 Seat Position Airbag Sensor Circuit Malfunction DESCRIPTION The seat position airbag sensor circuit consists of the center airbag sensor assembly and the seat position airbag sensor. DTC B1153/25 is recorded when a malfunction is detected in the seat position airbag sensor cir ...

В© 2011-2024 Copyright www.tsienna.net