Toyota Sienna Service Manual: Rear drum brake

Installation

HINT: Install the RH side by the same procedure as the LH side. 1. INSTALL REAR DISC BRAKE CYLINDER MOUNTING LH (a) Install the rear disc brake cylinder mounting LH with the 2 bolts. Torque: 8 ...

Disassembly

1. Remove rear wheel 2. Drain brake fluid Notice: wash the brake fluid off immediately if it attaches to any painted surface. 3. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY (a) Release the parking brake ...

Other materials:

Monitor drive pattern
1. MONITOR DRIVE PATTERN FOR ECT TEST (a) Perform this drive pattern as one method to simulate the detection conditions of the ECT malfunctions. (The DTCs may not be detected due the actual driving conditions. And some codes may not be detected through this drive pattern.) HINT: Preparation f ...

Installation
1. INSTALL REAR DIFFERENTIAL DRIVE PINION BEARING SPACER (a) Install a new bearing spacer. 2. INSTALL REAR DRIVE PINION FRONT TAPERED ROLLER BEARING (a) Install the tapered roller bearing. 3. INSTALL REAR DIFFERENTIAL DRIVE PINION OIL SLINGER (a) Install the oil slinger, as shown in the i ...

Drive belt
COMPONENTS REMOVAL 1. REMOVE FRONT WHEEL RH 2. REMOVE FRONT FENDER APRON SEAL RH (See page EM-26) 3. REMOVE V-RIBBED BELT (a) Using SST, release the belt tension by turning the belt tensioner counterclockwise, and remove the Vribbed belt from the belt tensioner. SST 09249-63010 (b) ...