Toyota Sienna Service Manual: Rear no. 1 Seat assembly (for Captain Seat Type)

Installation

1. INSTALL FRONT SEAT ASSEMBLY LH  Place the seat assembly in the cabin. NOTICE: Be careful not to damage the body.  Connect the connectors under the seat assembly.  T ...

Removal

HINT: On the RH side, use the same procedures as on the LH side. 1. REMOVE REAR NO. 1 SEAT ASSEMBLY LH  Remove the headrest.  7-Passenger RH: Remove the bolt and seat belt anchor p ...

Other materials:

Installation
1. INSTALL ACCELERATOR PEDAL ROD NOTICE:  Avoid physical shock to the accelerator pedal assembly.  Do not disassemble the accelerator pedal assembly.  Install the accelerator pedal rod with the 2 nuts. Torque: 4.9 N*m (50 kgf*cm, 43 in.*lbf)  Connect the ...

Automatic transaxle unit
COMPONENTS ...

The Rear Cross Traffic Alert function detection areas
The areas that vehicles can be detected in are outlined below. To give the driver a more consistent time to react, the buzzer can alert for faster vehicles from farther away. Example: The Rear Cross Traffic Alert function is operational when The BSM main switch is set to on. The ...