Toyota Sienna Service Manual: Rear no. 2 Seat assembly (for Power Seat Type LH Side)

Installation

1. INSTALL REAR NO. 2 SEAT ASSEMBLY RH  Place the rear No. 2 seat assembly RH in the cabin. NOTICE: Be careful not to damage the body.  Install the seat with the bolt. Torque: ...

Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 2. REMOVE REAR NO. 2 SEAT LEG SIDE GARNISH SUB-ASSEMBLY  Disengage the 9 clips and remove the rear No. 2 seat leg side garnish sub-a ...

Other materials:

Oil and oil filter
COMPONENTS REPLACEMENT CAUTION: Prolonged and repeated contact with engine oil will result in the removal of natural oils from the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may caus ...

Short to GND in Front Passenger Side Squib 2nd Step Circuit
DTC B1187/55 Short to GND in Front Passenger Side Squib 2nd Step Circuit DESCRIPTION The front passenger side squib 2nd step circuit consists of the center airbag sensor assembly and the front passenger airbag assembly. The circuit instructs the SRS to deploy when deployment conditions are ...

Problem symptoms table
When a "Normal" code is output during a DTC check but the problem still occurs, use the Problem Symptoms Table. The suspected areas (circuits or parts) for each problem symptoms are in the table. The suspected areas are listed in order of probability. A description of each of the char ...