Toyota Sienna Service Manual: Rear shock absorber

Installation

1. INSTALL REAR COIL SPRING INSULATOR UPPER LH (a) Install the insulator upper LH to the coil spring rear LH. 2. INSTALL COIL SPRING REAR LH (a) Apply a shop rug to the rear axle beam asse ...

Removal

1. REMOVE REAR WHEEL 2. REMOVE REAR SHOCK ABSORBER CAP LH (a) Remove the shock absorber head cover. (b) Remove the shock absorber cap LH. 3. REMOVE SHOCK ABSORBER ASSEMBLY REAR LH (a) S ...

Other materials:

Problem symptoms table
Proceed to the reference page shown in the table below for each malfunction symptom and troubleshoot each circuit. HINT: Troubleshooting of the theft deterrent system is based on the premise that the door lock control system and the wireless door lock control system are operating normally. Ac ...

Reassembly
1. INSTALL REAR DISC (a) Aligning the matchmarks, install the rear disc. HINT: Select the installation position where the disc has the minimum runout. 2. INSPECT DISC RUNOUT (a) Temporarily fasten the disc with the hub nuts. Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf) (b) Using a di ...

Removal
1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (See page AC-172) 2. REMOVE NO. 2 AIR CLEANER INLET (See page EM- 28) 3. REMOVE FRONT BUMPER ASSEMBLY (See page ET-3) 4. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY (a) Remove the bolt and disconnect the discharge hose sub-assembly from the coo ...