Toyota Sienna Service Manual: Rear washer motor
ON-VEHICLE INSPECTION
1. INSPECT REAR WASHER MOTOR
- Pour the water into the washer jar with the rear washer motor assembly installed to the washer jar assembly.
- Connect the battery (+) to the terminal 1 of the rear
washer motor assembly, the battery (-) to the
terminal 2 of the rear washer motor assembly.
Check that the water comes out from the washer jar.
Front washer motor
ON-VEHICLE INSPECTION
1. INSPECT FRONT WASHER MOTOR
Operation Check
Pour the water into the washer jar with the
windshield washer motor and pump installed to
the washer ...
Washer nozzle
ADJUSTMENT
1. REMOVE WASHER NOZZLE
With the engine running, check that the point where
the washer fluid hits the rear window is within the
range indicated by the hatched line.
...
Other materials:
Power Seat Motor Circuit
DESCRIPTION
When the power seat control switch is operated, a command signal is sent to
the position control ECU
and switch assembly (power seat control switch and ECU). The front power seat
switch then controls the
appropriate seat motor as needed. This memory system does not use a seat
po ...
A/F Sensor Circuit Slow Response
HINT:
DTC P2A00 indicates malfunctions related to the bank 1 A/F sensor.
DTC P2A03 indicates malfunctions related to the bank 2 A/F sensor.
Bank 1 refers to the bank that includes cylinder No. 1.
Bank 2 refers to the bank that includes cylinder No. 2.
Sensor 1 refers to the sensor mo ...
High Temperature
DTC 44-47 High Temperature
DESCRIPTION
DTC No.
DTC Detection Condition
Trouble Area
44-47
Sensor detects that DVD unit temperature is high (Over
80C).
Television display assembly
INSPECTION PROCEDURE
HINT:
After the inspection is completed, cl ...
