Toyota Sienna Service Manual: Reassembly

Adjustment

1. VEHICLE PREPARATION FOR FOG LIGHT AIMING  Prepare the vehicle:  Ensure there is no damage or deformation to the body around the fog lights.  Fill the fuel tank.   ...

Installation

1. INSTALL FOG LIGHT ASSEMBLY  Install the fog light assembly with the 2 claws and 2 pins. 2. INSTALL FRONT BUMPER ASSEMBLY 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 4. VEHICL ...

Other materials:

Installation
1. REMOVE FRONT SEAT INNER BELT ASSEMBLY HINT:  Refer to the instructions for reassembly of the front seat assembly (for flat type).  Refer to the instructions for reassembly of the front seat assembly (for manual seat).  Refer to the instructions for reassembly of the ...

Installing the second seats
Installing the second outside seats Align the marking on the seat side cover to the marking on the rail cover and align the marking on the seat front/back cover to the rail. Tip-up seat Ottoman seat Lower the seat and engage the latches. If you locked the seat lat ...

Installation
1. INSTALL SPARK PLUG (a) Install the 6 spark plugs. Torque: 18 N*m (183 kgf*cm, 13 ft.*lbf) 2. INSTALL IGNITION COIL ASSEMBLY (a) Install the 6 ignition coils with the 6 bolts. Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) (b) Connect the 6 ignition coil connectors. 3. INSTALL NO. 1 SUR ...