Toyota Sienna Service Manual: Removal
1. REMOVE FRONT WHEEL
2. REMOVE FRONT AXLE HUB LH NUT
HINT: (See page AH-4) SST 09930-00010
3. SEPARATE SPEED SENSOR FRONT LH
HINT: (See page AH-4)
4. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY LH
HINT: (See page AH-4)
5. REMOVE FRONT DISC
6. SEPARATE TIE ROD ASSEMBLY LH
HINT: (See page AH-4) SST 09628-62011
7. SEPARATE FRONT SUSPENSION ARM SUBASSEMBLY LOWER NO.1 LH
HINT: (See page AH-4)
8. REMOVE FRONT AXLE ASSEMBLY LH
HINT: (See page AH-4)
9. REMOVE LOWER BALL JOINT ASSEMBLY FRONT LH
a) Remove the cotter pin and nut.
(b) Using SST, remove the lower ball joint assembly front LH.
SST 09628-62011
Front lower ball joint
COMPONENTS
...
Inspection
1. INSPECT LOWER BALL JOINT ASSEMBLY FRONT LH
(a) As shown in the illustration, flip the ball joint stud
back and forth 5 times, before installing the nut.
(b) Using a torque wrench, turn the ...
Other materials:
Installation
1. INSTALL FRONT DOOR GLASS WEATHERSTRIP
Install the front door grass weatherstrip.
2. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY
(See page MI-45)
3. INSTALL FRONT DOOR TRIM BOARD SUBASSEMBLY
4. INSTALL POWER WINDOW REGULATOR MASTER
SWITCH ASSEMBLY
5. INSTALL BACK FRAME PLATE
6. INSTALL FR ...
Engine oil pressure switch
ON-VEHICLE INSPECTION
1. INSPECT ENGINE OIL PRESSURE SWITCH
ASSEMBLY
Disconnect the connector from the oil pressure
switch assembly.
With the switch still installed, measure the
resistance between the terminal of the engine oil
pressure switch and engine ground.
Standard ...
Wrong Disc/ Disc cannot be Read
DTC 44-41 Wrong Disc
DTC 44-42 Disc cannot be Read
DESCRIPTION
DTC No.
DTC Detecting Condition
Trouble Area
44-41
An unsuitable disc is inserted
DVD
Television display assembly
44-42
The disc cannot be read.
IN ...
