Toyota Sienna Service Manual: Removal

Toyota Sienna Service Manual / Audio / visual / Radio receiver / Removal

1. REMOVE INSTRUMENT CLUSTER CENTER NO. 1 FINISH PANEL

2. REMOVE INSTRUMENT CLUSTER CENTER NO. 2 FINISH PANEL

3. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH

4. REMOVE RADIO RECEIVER

REMOVE RADIO RECEIVER

Remove the 4 screws.
Disconnect the connectors and remove the radio receiver with bracket.

5. REMOVE RADIO NO. 1 BRACKET

REMOVE RADIO NO. 1 BRACKET

Remove the 4 screws and radio No. 1 bracket.

6. REMOVE RADIO NO. 2 BRACKET

REMOVE RADIO NO. 2 BRACKET

Remove the 4 screws and radio No. 2 bracket.

Installation

1. INSTALL RADIO NO. 2 BRACKET Install radio No. 2 bracket with the 4 screws. 2. INSTALL RADIO NO. 1 BRACKET Install radio No. 1 bracket with the 4 screws. 3. INSTALL R ...

Other materials:

Adjustment procedure
Hold the steering wheel and push the lever down. Adjust to the ideal position by moving the steering wheel horizontally and vertically. After adjustment, pull the lever up to secure the steering wheel. ...

Front Airbag Sensor RH Circuit Malfunction
DTC B1148/36 Front Airbag Sensor RH Circuit Malfunction DESCRIPTION The front airbag sensor RH circuit consists of the center airbag sensor assembly and front airbag sensor RH. If the center airbag sensor assembly receives signals from the front airbag sensor RH, it judges whether or not the ...

Terminals of ECU
1. CHECK DISTANCE CONTROL ECU Reference: waveform 1 HINT: Terminal: LRDD - SGND Gauge set: 2 V/DIV., 10 ms./DIV. Condition: ignition switch in the ON position Reference: waveform 2 HINT: Terminal: LRRD - SGND Gauge set: 2 V/ ...