Toyota RAV4 manuals

Toyota Sienna Service Manual: Removal

1. DRAIN ENGINE COOLANT

2. REMOVE V-BANK COVER SUB-ASSEMBLY

3. REMOVE NO. 2 AIR CLEANER INLET

4. REMOVE NO. 1 AIR CLEANER INLET

5. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

6. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

7. REMOVE ENGINE COOLANT TEMPERATURE SENSOR

REMOVE ENGINE COOLANT TEMPERATURE SENSOR

  1.  Remove the engine coolant temperature sensor connector.
  2.  Remove the engine coolant temperature sensor.
Engine coolant temperature sensor
COMPONENTS ...

Inspection
1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR  Using an ohmmeter, measure the resistance between the terminals. Standard resistance If the result is as specified, do not replace ...

Other materials:

Removal
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working 2. REMOVE FRONT SEAT ASSEMBLY HINT:  Refer to the instructions for removal of the front seat assembly (for flat type).  Refer to the ins ...

Customize parameters
HINT: The following items can be customized. NOTICE:  After confirming whether the items requested by the customer are applicable or not for customization, perform customize operations.  Be sure to record the current settings before customizing.  When troubleshooting, ...

Diagnosis system
1. DESCRIPTION  When troubleshooting a vehicle with the diagnosis system, the only difference from the usual troubleshooting procedure is connecting the intelligent tester to the vehicle and reading various data output from the vehicle's clearance warning ECU. The clearance warn ...

В© 2011-2024 Copyright www.tsienna.net