Toyota Sienna Service Manual: Removal

Toyota Sienna Service Manual / Other system / Power point socket (for Rear Side) / Removal

1. REMOVE REAR DOOR SCUFF PLATE LH

2. REMOVE REAR DOOR WEATHERSTRIP LH

3. REMOVE BACK DOOR WEATHERSTRIP

4. REMOVE BACK DOOR SCUFF PLATE

5. REMOVE QUARTER TRIM FRONT PANEL ASSEMBLY LH

6. REMOVE POWER POINT SOCKET ASSEMBLY

REMOVE POWER POINT SOCKET ASSEMBLY

Release the 2 claw fittings and remove the power point socket assembly.

Power point socket (for Rear Side)

COMPONENTS ...

Installation

1. INSTALL POWER POINT SOCKET ASSEMBLY Engage the 2 claws to install the power point socket assembly. 2. INSTALL QUARTER TRIM FRONT PANEL ASSEMBLY LH 3. INSTALL BACK DOOR SCUFF PL ...

Other materials:

Inspection
1. Inspect pack clearance of reverse clutch (A) install the intermediate shaft and needle roller bearing onto the transaxle rear cover. (B) using a dial indicator, measure the reverse clutch pack clearance while applying and releasing compressed air (392 kpa, 4.0 Kgf/cm2, 57 psi). Pack c ...

Disassembly
HINT: Overhaul the RH side by the same procedures as these of the LH side. 1. REMOVE REAR WHEEL 2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY LH HINT: Do not disconnect the flexible hose from the brake caliper. 3. REMOVE REAR DISC (a) Release the parking brake, and remove the rear disc. H ...

Removal
1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH 2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG 3. REMOVE FRONT DOOR ARMREST BASE PANEL ASSEMBLY 4. REMOVE BACK FRAME PLATE 5. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY 6. REMOVE FRONT DOOR TRIM BOARD SUBASSEMBLY 7. REMOVE OUTER RE ...