Toyota Sienna Service Manual: Removal

Toyota Sienna Service Manual / Seat / Rear no. 2 Seat assembly (for Power Seat Type RH Side) / Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE REAR NO. 2 SEAT LEG SIDE GARNISH SUB-ASSEMBLY

REMOVE REAR NO. 2 SEAT LEG SIDE GARNISH SUB-ASSEMBLY

Disengage the 9 clips and remove the rear No. 2 seat leg side garnish sub-assembly.
Remove the 9 clips from the rear No. 2 seat leg side garnish sub-assembly.

3. REMOVE REAR SEAT LEG SIDE GARNISH SUBASSEMBLY

REMOVE REAR SEAT LEG SIDE GARNISH SUBASSEMBLY

Disengage the 4 clips and remove the rear seat leg side garnish sub-assembly.
Remove the 4 clips from the rear seat leg side garnish sub-assembly.

4. REMOVE NO. 2 SEAT HINGE COVER

REMOVE NO. 2 SEAT HINGE COVER

Disengage the 4 claws and remove the No. 2 seat hinge cover.

5. REMOVE REAR NO. 2 SEAT ASSEMBLY

REMOVE REAR NO. 2 SEAT ASSEMBLY

Disconnect the connector.
Remove the 6 bolts.

REMOVE REAR NO. 2 SEAT ASSEMBLY

Pull the lever under the No. 2 seat cushion subassembly and remove the rear No. 2 seat assembly

Rear no. 2 Seat assembly (for Power Seat Type RH Side)

COMPONENTS ...

Disassembly

1. REMOVE REAR NO. 2 SEAT COVER BEZEL Remove the 3 screws. Disengage the 3 claws and remove the rear No. 2 seat cover bezel. 2. REMOVE REAR SEAT RECLINING COVER RH & ...

Other materials:

Maintenance data (fuel, oil level, etc.)
Dimensions and weights *1: Unladen vehicle *2: The model code is indicated on the Certification Label. For details, see “Vehicle identification” below. *3: The towing package is required. Toyota does not recommend towing with this vehicle without the towing package. Vehicle identifi ...

Oxygen Sensor Circuit
HINT: Sensor 2 refers to the sensor mounted behind the Three-Way Catalytic Converter (TWC) and located far from the engine assembly. DESCRIPTION A three-way catalytic converter (TWC) is used in order to convert the carbon monoxide (CO), hydro carbon (HC), and nitrogen oxides (HOx) into ...

Rear Occupant Classification Sensor RH Collision Detection
DTC B1788 Rear Occupant Classification Sensor RH Collision Detection DESCRIPTION DTC B1788 is output when the occupant classification ECU receives a collision detection signal sent by the rear occupant classification sensor RH if an accident occurs. DTC B1788 is also output when the front s ...