1. Disconnect cable from negative battery terminal
2. REMOVE STEERING COLUMN COVER LOWER
(A) insert the key into the ignition key cylinder and release the steering lock.
(B) turn the steering wheel clockwise to gain access to the screw and remove the screw.
(c) Turn the steering wheel counterclockwise to gain access to the screw and remove the screw.
(d) Detach the 4 claws, and remove the steering column cover lower.
3. REMOVE IGNITION SWITCH ASSEMBLY
(a) Disconnect the ignition switch connector.
(b) Remove the 2 screws and ignition switch.
Eject Error/ Elevator Error/ Clamp Error
DTC 44-45 Eject Error
DTC 44-51 Elevator Error
DTC 44-52 Clamp Error
DESCRIPTION
DTC No.
DTC Detecting Condition
Trouble Area
44-45
Disc cannot be ejected.
Television display assembly
44-51
Mechanical error occurs during elevator operation.
...
Manual Up / Down and Auto Down Function does not Operate on
Driver Side
DESCRIPTION
If the manual UP/DOWN function does not operate, no power may be supplied to
the power window
master switch or the power window motor. The power window master switch itself
or the wire harness may
be malfunctioning.
WIRING DIAGRAM
INSPECTION PROCEDURE
1 INSPECT FUSE (P/W)
...
Replying to a message
Display the message inbox screen.
Select the desired message from the list.
Select “Quick Message”.
Select the desired message.
Select “Send”.
If an error message is displayed, follow the guidance on the screen to try
again.
Editing quick reply message
Select “Quick ...