Toyota RAV4 manuals

Toyota Sienna 2010-2024 Owners Manual: Removing a child restraint installed with a seat belt

Toyota Sienna 2010-2024 Owners Manual / For safety and security / For safe use / Installing child restraints / Removing a child restraint installed with a seat belt

Push the buckle release button and fully retract the seat belt.

Toyota Sienna. Removing a child restraint installed with a seat belt


Installing child restraints using a seat belt (child restraint lock function belt)
Rear facing - Infant seat/convertible seat Place the child restraint system on the rear seat facing the rear of the vehicle. Run the seat belt through the child restraint syste ...

Child restraint systems with a top tether strap (second seat)
Secure the child restraint system using the seat belt or LATCH anchors, and adjust the head restraint to the uppermost position. *: Ottoman seat only Latch the hook onto t ...

Other materials:

Removal
1. REMOVE FRONT WHEEL 2. REMOVE REAR WHEEL 3. REMOVE TIRE PRESSURE WARNING VALVE AND TRANSMITTER (a) Remove the valve core and cap, and release the air from the tire. (b) After ensuring that a sufficient amount of air has been released, remove the nut and washer that are used to secure ...

Approach warning
When your vehicle is too close to a vehicle ahead, and sufficient automatic deceleration via the cruise control is not possible, the display will flash and the buzzer will sound to alert the driver. An example of this would be if another driver cuts in front of you while you are following a vehi ...

Installation
1. INSTALL AIR CONDITIONING BLOWER ASSEMBLY (a) Install the air conditioning blower assembly with the 3 bolts. Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) NOTICE: Tighten the bolts in the order shown in the illustration to install the air conditioning blower assembly. 2. INSTALL AIR CONDITIO ...

В© 2011-2024 Copyright www.tsienna.net