Toyota Sienna Service Manual: Roof headlining

Front floor footrest

COMPONENTS Removal 1. REMOVE FRONT FLOOR FOOTREST Using a screwdriver, disengage the 2 clips and remove the footrest. HINT: Tape the screwdriver tip before use. Disengage the clips ...

Removal

HINT: On the LH side, use the same procedures as on the RH side. 1. REMOVE FRONT DOOR SCUFF PLATE RH Using a screwdriver, disengage the 3 clips and 2 claws, and remove the scuff plate. ...

Other materials:

Fold Lock Switch Circuit
DESCRIPTION Each of the left and right seats has a fold lock switch that detects the lock condition of the seat legs and floor when the seat is in the stowed state. If the fold lock switch detects an unlock condition, the 3rd SEAT indicator on the combination meter will come on. WIRING DIAGR ...

Reassembly
1. INSTALL REAR DISC (a) Aligning the matchmarks, install the rear disc. HINT: Select the installation position where the disc has the minimum runout. 2. INSPECT DISC RUNOUT (a) Temporarily fasten the disc with the hub nuts. Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf) (b) Using a di ...

Roof luggage carrier (if equipped)
Roof luggage carrier components Roof rails Cross rails Adjusting the position of cross rails Turn the knobs counterclockwise to release the cross rails. Slide the cross rails to the appropriate position for loading luggage and turn the knobs clockwise to tigh ...