DTC 44-46 Scratched / Reversed Disc
DESCRIPTION
DTC No. |
DTC Detecting Condition |
Trouble Area |
44-46 |
Scratches or dirt is found on DVD surface or DVD is set upside down. |
|
INSPECTION PROCEDURE
HINT: After the inspection is completed, clear the DTCs.
1 CHECK THAT DISC IS INSERTED PROPERLY
OK: Disc is properly inserted
2 CHECK DISC
OK: No deformation or cracks on the disc.
3 DISC CLEANING
NOTICE: Do not use a conventional record cleaner or anti-static preservative.
4 CLEAR DTC
5 RECHECK DTC
OK: Malfunction disappears.
6 REPLACE DISC WITH ANOTHER AND RECHECK
OK: Malfunction disappears.
END
Mute Signal Circuit between Radio Receiver and Television Display
Assembly
DESCRIPTION
The radio receiver controls the volume according to the MUTE signal from the
television display
assembly.
The MUTE signal is sent to reduce noise and a popping sound generated when
switching the mode, etc.
If there is an open in the circuit, noise can be heard from the speake ...
Short to GND in Side Squib LH Circuit
DTC B0117/45 Short to GND in Side Squib LH Circuit
DESCRIPTION
The side squib LH circuit consists of the center airbag sensor assembly and
the front seat side airbag
assembly LH.
This circuit instructs the SRS to deploy when deployment conditions are met.
DTC B0117/45 is recorded when a s ...
Speaker Circuit
DESCRIPTION
The sound signal that has been amplified by the stereo component amplifier is
sent to the speakers from
the stereo component amplifier through this circuit.
If there is a short in this circuit, the stereo component amplifier detects it
and stops output to the speakers.
Thus s ...