Toyota Sienna Service Manual: Slide door lock
INSPECTION
1. INSPECT SLIDE DOOR LOCK REMOTE CONTROL SUB-ASSEMBLY LH
- Inspect the resistance of the switch.
Resistance
If the result is not as specified, replace the control assembly.
2. INSPECT SLIDE DOOR LOCK REMOTE CONTROL SUB-ASSEMBLY RH
- Inspect the resistance of the switch.
Resistance
If the result is not as specified, replace the control sub-assembly.
3. INSPECT SLIDE DOOR LOCK REMOTE CONTROL SUB-ASSEMBLY LH
- Inspect the resistance of the switch.
Resistance
If the result is not as specified, replace the control sub-assembly.
4. INSPECT SLIDE DOOR LOCK REMOTE CONTROL SUB-ASSEMBLY RH
- Inspect the resistance of the switch.
Resistance
If the result is not as specified, replace the control sub-assembly.
Installation
1. INSTALL SLIDE DOOR ROLLER ASSEMBLY UPPER
Apply MP grease to the rotating area of the roller.
Install the roller with the 2 bolts.
Torque: 13 N*m (130 kgf*cm, 10 ft.*lbf)
2. INSTALL S ...
Exterior
...
Other materials:
Audio system types
Entune Audio
Entune Audio Plus/Entune Premium Audio with Navigation
Owners of models equipped with a navigation system should refer to
the “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S
MANUAL”.
Using cellular phones
Interference may be heard through the audio system’s speakers if a c ...
Removal
1. REMOVE ROOF HEADLINING ASSEMBLY
2. REMOVE SLIDING ROOF SIDE GARNISH LH
Disengage the 3 claws.
Disengage the rear clip.
Disengage the front clip.
Remove the slide garnish by pulling it rearward.
3. REMOVE SLIDING ROOF SIDE GARNISH RH
HINT:
Use the same procedures described abov ...
Transmission Fluid Temperature Sensor "A"
Performance
DESCRIPTION
The ATF (Automatic Transmission Fluid) temperature sensor converts the fluid
temperature into a
resistance value which is input into the ECM.
MONITOR DESCRIPTION
The ATF temperature sensor converts the ATF temperature to an electrical
resistance value. Based on
the resis ...
