Toyota Sienna Service Manual: Sliding roof

Installation

1. INSTALL ROOF HEADLINING ASSEMBLY w/ sliding roof: Install the roof headlining with the 5 clips. w/o sliding roof: Install the roof headlining with the 3 clips. NOTICE: In order to ...

Sliding roof system

PARTS LOCATION ...

Other materials:

Rear Air Outlet Damper Control Servo Motor Circuit
DESCRIPTION This circuit turns the servo motor and changes each damper position by receiving the signals from the A/ C amplifier. The rear air outlet damper servo motor switches the air outlet mode by rotating (normal, reverse) with electrical power from the A/C amplifier. WIRING DIAGRAM ...

Inspection
1. INSPECT PACK CLEARANCE OF FORWARD CLUTCH (a) Install the forward clutch on the oil pump. NOTICE: Be careful not to damage the oil seal ring of oil pump. b) Using a dial indicator, measure the forward clutch pack clearance while applying and releasing compressed air (392 kPa, 4.0 kgf/cm ...

Precaution
NOTICE: Because the compressor operates at high voltages, wear electric insulated gloves and pull out the service plug to cut the high-voltage circuit before inspection. 1. DO NOT HANDLE REFRIGERANT IN AN ENCLOSED AREA OR NEAR AN OPEN FLAME 2. ALWAYS WEAR EYE PROTECTION 3. BE CAREFUL NOT ...