Toyota Sienna Service Manual: Steering Column Assembly

Repair

1. STEERING OFF CENTER REPAIR PROCEDURE (a) Inspect steering wheel off center. (1) Apply masking tape to the top center of the steering wheel and steering column upper cover. (2) Drive th ...

Removal

1. PRECAUTION HINT: See page RS-1 2. DISCONNECT BATTERY NEGATIVE TERMINAL Wait for 90 seconds after disconnecting the battery terminal to prevent the airbag working. 3. PLACE FRONT WHEELS FACING ...

Other materials:

Inspection
1. INSPECT PRELOAD (a) Using SST(s) and a torque wrench, check the initial torque within the backlash range. SST 09326-20011 Torque: 0.9 to 1.4 N*m (9 to 14 kgf*cm, 8.0 to 12.4 in.*lbf) HINT: Use a torque wrench with a fulcrum length of 160 mm (6.30 in.). (b) Using SST(s) and a torque w ...

Disassembly
1. REMOVE PROPELLER SHAFT ASSEMBLY (a) Put matchmarks on both the flanges. (b) Remove the 4 nuts, bolts and washers. 2. REMOVE INTERMEDIATE SHAFT (a) Put matchmarks on the propeller shaft subassembly and universal joint flange. NOTICE: Do not use a punch for the marks. (b) Using a ...

System description
1. Radio and navigation assembly outline  Conventionally, 2 separate devices, a "radio and display" and a "navigation ECU" are used. This model has adopted a new type, combining these devices into a single unit. 2. Navigation system outline  Vehicle ...