Toyota Sienna 2010-2024 Owners Manual: Steering wheel audio switches
Some audio features can be controlled using the switches on the steering wheel.
Operation may differ depending on the type of audio system or navigation system. For details, refer to the manual provided with the audio system or navigation system.
Operating the audio system using the steering wheel switches
- Volume switch
- Increases/decreases volume
- Press and hold: Continuously increases/decreases volume
- Cursor switch (“” and “”)
- Selects (radio stations/radio presets/tracks/files/songs)
- Press and hold: Fast up/ down (radio stations)
- Fast up/down (tracks/files)
Cursor switch (“” and “”)
- Seek up/down (radio station)
- Press and hold: Continuously seek up/down (radio station)
- Press and hold: Fast forward/rewind (tracks/files/songs)
- “MODE/HOLD” switch
- Changes audio source
- Press and hold this switch to mute or pause the current operation To cancel the mute or pause, press and hold.
- Back switch
- Returns to the previous screen (Only when the back button is displayed)
- Enter switch
- Displays the preset/list screen
- Selects items
| WARNING To reduce the risk of an accident Exercise care when operating the audio switches on the steering wheel. |
Touch screen gestures
Operations are performed by touching the screen directly with your
finger.
Operation method
Outline
Main use
Touch
Quickly touch and
release once.
...
AUX Port/USB Port
Connect an iPod, USB memory device or portable audio player
to the AUX port/USB port as indicated below. Select “iPod”,
“USB” or “AUX” on the audio source selection screen and the
devic ...
Other materials:
Rear wiper rubber
COMPONENTS
REMOVAL
1. REMOVE REAR WIPER BLADE ASSEMBLY
Remove the rear wiper arm head cap from the rear
wiper arm.
Raise the rear wiper blade to the position as shown
in the illustration where the meshing of the claw is
disengaged with the click sound.
NOTICE:
...
Rear Door ECU RH Communication Stop
DTC B1216 Rear Door ECU RH Communication Stop
DESCRIPTION
DTC B1216 is output when communication between the power slide door ECU RH
and the multiplex
network gateway ECU stops for more than 10 seconds.
DTC No.
DTC Detection Condition
Trouble Area
B1216
...
Cruise Main Indicator Light Circuit
DESCRIPTION
When the cruise control main switch is on, the CRUISE main indicator light
and READY indicator light
come on. This indicates the control condition (presence or absence of a vehicle
in front, vehicle-to-vehicle
distance, and set vehicle speed) and fail-safe state through the multip ...
