Toyota RAV4 manuals

Toyota Sienna 2010-2024 Owners Manual: Taking out the spare tire

Toyota Sienna. Taking out the spare tire


  1. Slide the front passenger’s seat to the frontmost lock position and the right side second seat to the rearmost lock position so they will not interfere with the jack handle.
  2. Open the right side sliding door and you will find the flap on the floor. Pull back the flap to find the spare tire clamp bolt.

Toyota Sienna. Taking out the spare tire


  1. Attach the adapter socket over the spare tire clamp bolt.

    Connect the jack handle and the adapter socket. Turn the jack handle.

    The tire will be lowered completely to the ground.

Toyota Sienna. Taking out the spare tire


  1. Take the spare tire out from underneath the vehicle and remove the holding bracket.
WARNING

When storing the compact spare tire

Be careful not to catch fingers or other body parts between the compact spare tire and the body of the vehicle.

Taking out the jack and tools
Remove the cover. Remove the adapter socket. Remove the jack. Remove the wheel nut wrench. ...

Replacing a flat tire
Chock the tires. Slightly loosen the wheel nuts (one turn). Turn the tire jack portion A by hand until the notch of the jack is in contact with the jack point. T ...

Other materials:

Disassembly
1. REMOVE REAR NO. 2 SEAT COVER BEZEL  Remove the 5 screws.  Disengage the 5 claws and remove the rear No. 2 seat cover bezel. 2. REMOVE REAR SEAT RECLINING COVER LH  Remove the 2 screws.  Disengage the claw and remove the rear seat reclining cover LH. ...

Folding Motor Circuit
DESCRIPTION The fold seat control ECU receives a switch operation signal from the fold seat switch and activates the folding motor. At this time, the Hall IC (seat cushion position sensor) detects the actuation signal. The fold seat control ECU uses signals from the Hall IC (seat cushion posi ...

Intermediate Shaft Speed Sensor "A"
DESCRIPTION This sensor detects the rotation speed of the counter gear. By comparing the counter gear speed signal (NC) with the direct clutch speed sensor signal (NT), the ECM detects the shift timing of the gears and appropriately controls the engine torque and hydraulic pressure according ...

© 2011-2024 Copyright www.tsienna.net