Toyota Sienna Service Manual: Television display
COMPONENTS
Removal
1. REMOVE TELEVISION BASE
- Release the 4 clips and remove the television base.
2. REMOVE TELEVISION DISPLAY ASSEMBLY
- Disconnect the connector and remove the 4 bolts and the television display assembly.
Installation
1. INSTALL TELEVISION DISPLAY ASSEMBLY
- Install the television display assembly with the 4 bolts.
- Connect the connector.
2. INSTALL TELEVISION BASE
- Engage the 4 clips to install the television base.
Stereo component amplifier
COMPONENTS
Removal
1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
2. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY
Disconnect the connectors.
Remove the 2 nuts and the stereo comp ...
Radio antenna cord
COMPONENTS
...
Other materials:
Problem symptoms table
HINT:
Use the table below to help determine the cause of the
problem symptom. The potential causes of the symptoms
are listed in order of probability in the "Suspected Area"
column of the table. Check each symptom by checking the
suspected areas in the order they are listed. Re ...
Emission inspection and
maintenance (I/M)
programs
Some states have vehicle emission inspection programs which
include OBD (On Board Diagnostics) checks. The OBD system
monitors the operation of the emission control system.
If the malfunction indicator lamp comes on
The OBD system determines that a problem exists somewhere in the
emission contr ...
Driving the vehicle
The following procedures should be observed to ensure safe
driving:
Starting the engine
Driving
With the brake pedal depressed, shift the shift lever to D.
Release the parking brake.
Gradually release the brake pedal and gently depress the accelerator
pedal to accelerate the vehicle.
...
